Charles Edward - 2019 38' SEAWIND CATAMARANS 1160 LITE
Fairhaven Massachusetts United States
$390,000 USD

Options and Equipment Included

Anchoring:

• Standard anchor with 55 meters of chain
• 2nd anchor is a Fortress with both chain and line
• Anchor bridle
• Windlass
• Windlass foot switch
• Dinghy anchor

Comfort:

• Fans in each cabin and galley
• Insect screens on windows and between saloon and cabin
• 6 privacy screens
• Starboard head with manual toilet, basin, and handheld shower
• Port has a shower, basin, and electric toilet
• Two bench-top freezers and refrigerator

Electric:

• Shoreline cable and converter adapter 30 to 50
• 2 shore power 110 outlets
• 4 charging stations for phones and computers
• Solar Panel
• Transom light
• Two Mastervolt AGM Batteries (270 house + 130 start)

Engine:

• Two 25 hp high thrust Yamahas and dinghy’s 6 hp Yamaha

Navigation:

• B&G 9” chart plotter (Zeus)
• Two additional 4.5” multifunctional displays
• AIS trans and receive
• Radar reflector
• B&G VHS radio and handheld radio
• Radar reflector-Ecomax target enhancer
• Iridium Satellite phone

Plumbing:

• Freshwater transom shower
• One electric and one manual toilet
• Shower stall

Safety:

• Life raft
• Jack lines
• Flares, flare gun
• 2 self-inflating PFDs
• 6 offshore type 1 PFD
• 2 fire extinguishers
• First aid kit
• Dingy davits
• 9’ dingy RIB
• Dingy outboard bracket
• 2 mast steps at mast
• 4 fenders and an abundance of dock lines
• Iridium sat phone

LPG:

• Two 4.5 LPG bottles and holders
• Magma Grill
• BEP gas detector

Sails:

• Doyle self-tacking jib with roller reefing
• Battened Main
• Screacher
• Deck fittings for all sails
• Electric winch

Deck:

• Aluminum Hatches & portholes (9 in total)
• 4 x Forward Hatches 470mm x 470mm
• 2 x Mid cabin hatches 470mm x 470mm
• 1 x Port Bathroom window hatch 507mm x 377mm
• 1 x Galley window hatch 507mm x 377mm
• 1 x Aft Cabin window hatch 507mm x 377mm
• Fiberglass Deck Hatches:
• Forward anchor & storage hatches x 5
• Cockpit storage hatches x 2
• 6 x Docking cleats. Each side: bow, stern & amidships.
• 1 x Heavy-duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks. All halyards & sail controls to cockpit.
• 12 x Rope clutches.
• Sheet winches: 2 x 46ST – 2 speed self-tailing & 2 x 40ST – 2 speed self-tailing.
• Stanchions/Rails: High-quality stanchions, bow rails, and stern rails with 3 life-lines. 700mm high to meet Australian/CE survey requirements.
• 2 x transom access gates with pelican hook releases.
• 2 x side access gates with pelican hook releases.
• Aft swim ladder: folding stainless aft swim ladder.

Accommodations

INTERIOR FINISH:

• New Lightweight interior design.
• New Floors: synthetic timber flooring.
• Sides and cabin top lined with vinyl or molded gelcoat.

SALOON

• Ornate polished timber dining table: Lowers to create a coffee table or double bed.
• Upholstered settee.
• Cocktail cabinet with ornate polished hinging lid.
• Forward opening windows with in marine ocean hatch frame. Side windows in 6mm toughened glass.
• Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway.
• Removable aluminum framed, helm hatches.
• Window Cabinets at helm station

SLEEPING CABINS:

• Polished timber solid doors on all private cabins.
• Port & Starboard fwd cabins: Each queen-sized bed (2050mm x 1540mm)
• Aft Starboard cabin: Double bed (1990mm x 1230mm)
• Mattresses to be 150mm (6”) foam upholstered.
• Cabins lined.
• Recessed 12-volt lighting.
• Storage/Cupboards.

PORT HEAD:

• Polished timber solid lockable door.
• Manual toilet. Discharge via holding tank.
• Holding tanks built-in. Discharge Pump out by shore station or directly overboard. Port 130L and Stb 110L.
• Pipes, skin fittings, and sea-cocks are easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water.
• Separate shower stall with a clear glass door. Wall-mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality.

STARBOARD HEAD:

• Polished timber solid lockable door.
• Manual toilet. Discharge via holding tank.
• Holding tank built-in. Discharge Pump out by shore station or directly overboard.
• Pipes, skin fittings, and seacocks to be easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilge pump.
• Cupboard/shelves to very high quality

Galley

• Spacious galley with coordinated Polystone counter surfaces, timber accents.
• Three (3) burner LPG stove & oven. Stainless steel pot holders. Flame failure device to shut off LPG immediately in the event of the flame going out.
• Double bowl stainless steel sink.
• Pressure hot & cold fresh water system. Single lever mixing tap.
• Refrigerator: Front opening upright fridge 130 liters.
• Spacious freezer – large 60-liter top loading, heavily insulated. 12-volt Eutectic system by ICEER.
• Under bench storage with polished timber door fronts & cutlery drawers.
• Inboard side of galley: Over-bench cupboard with sliding door fronts.
• Trash bin, paper towel holder.
• LPG solenoid control in the galley.

Electrical

• High-quality DC electrical switch panel with circuit breakers, LED indicator lights, and voltage display.
• Marine-grade tinned electrical wiring with extensive use of heat-sealed connectors.
• 230amp heavy-duty isolation switch.
• 12 V lighting: Numerous 12V interior lamps and courtesy lights throughout, including recessed lights in the cockpit. Dome lights in the cockpit.
• 4 x 12V Outlets.
• Survey approved navigation lights. Port & Starboard mounted on bow rails.
• Deck floodlight mounted on spreaders.
• Masthead anchor / riding light.
• New Additional mood lighting in saloon.

Mast/Boom/Sails

• Clear anodized aluminum mast and boom. Single Spreader, 7/8 rig.

Standing Rigging

• Forestay 3/8 (10mm) 1 x 19 Dieform wire.
• Sidestays 3/8 (10mm) 1 x 19 Dieform wire
• Diamonds 5/16 (8mm) 1 x 19 Dieform wire.

Halyards

• Main halyard: 12 mm Spectra rope: Heavy-duty shackle.
• Genoa halyard: 8 mm Spectra rope. Heavy-duty shackle.
• Topping lift: 10 mm rope, Heavy-duty shackle.
• Spinnaker Halyard: 10mm rope with snap-shackle spliced to end.
• Boom outhaul.
• 2 x mainsail single line reefing fitted.
• All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches.
• Fully battened mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fiberglass sail battens + batten cars.
• Cruising mainsail cover with an integrated lazy jack system.
• Self-tacking headsail with furler. Curved headsail traveler track with end stops. Control sheet to cockpit.